Placsell® Sanitario Industrial (PSI).

Specifications.

Characteristics

Specification

CHEMICAL NAME Polypropylene
GRADE Co-polymer
NORMAL STATE Solid = Rolls or plates
STANDARD COLOURS White
ODOUR Imperceptible
SPECIFIC WEIGHT 0,91
REACTION WITH OTHER CHEMCAL PRODUCTS Information available upon request
STABILITY Ductile at 146 ºC. Does not break down when subject to temperatures below 280ºC.
FIRE RATING As with most organic polymers, PP will burn slowly and form drops but is unlikely to catch fire and, while combustible, is not flammable. The main combustion products are carbon dioxide, carbon monoxide, water and carbon. In the event of fire, any fire extinguisher can be used. (DIN 4102= B2) (DIN EN 13501-1 = E-d2)
CORROSION Non-corrosive
TOXICITY Standard PP is advisable for use in contact with food.

Properties

Specification

DENSITY 0,91 g/m3
TENSILE STRENGTH 17 M pa. Testing method: BS 2782 method 320C
HARDNESS 70 Shore D
RESISTENCE IZOD 23ºC 300 J/m. Testing method: ASTM D256A, VNE 53184
RESISTANCE MODULUS Mpa 900-1100 DIN 53456
FLEXION MODULUS Mpa 900-1300 ASTM 790
HEAT DISTORTION TEMP. (ºC) 85-95 ASTM 648 0 46N/mm2 (HDT)
SOFTENING TEMPERATURE (ºC) 145-150 DIN 53460 VICAT
SPECIFIC HEAT (KJ/kgºC) 1.7-1.9
EXPANSION COEFFICIENT K-1 1x10-4 a 20ºC DIN 53752, lineal 2x10-4 a 90ºC
SPECIFIC INSULATION RESISTANCE (ohm.cm) > 10 16 DIN 53482
SURFACE RESISTIVITY (ohm) > 10 13 DIN 53482
RELATIVE PERMISSIVITY 2.25 a 1KH IEC 250